Tcpip Nodes:

-44.104.6.1 "switch.lincoln.ampr.org"

 (Local radio ports)

 Hardware: Intel 66Mhz 486DX/2, 16 Megs of RAM, 670 Meg SCSI hard drive.

 There are six communications ports associated with this computer:


 1. AX1 modem port with a Hayes Optima V.24 28.8 modem.

 2. AX2 radio port with a Kenwood TM-421A on 449.125/4.125 Mhz using a

    diamond x-500 omni antenna. There is one 1k2 Bps TNC connected to this

    radio providing Tcp/ip link to the Southboro, MA switch.

 3. AX3 radio port with a Kenwood TM-V7 on 445.925/0.925 Mhz using a

    fifteen element yagi. There is one 9k6 Bps TNC connected to this radio

    providing Tcp/ip link to the Andover, MA switch.


 4. AX4 radio port with a Kenwood TM-321A on 223.700 Mhz using a six element

    yagi. There is one 2k4 Bps TNC connected to this radio providing Tcp/ip

    link to the Providence, RI switch.


 5. AX5 radio port with a Kenwood TM-221A on 144.910 Mhz using a six element

    yagi. There is one 1k2 Bps TNC connected to this radio providing Tcp/ip

    link for local users.


 6. LAN network port running 10baseT connection to the ka1rci TCPIP lan.

    This port provides connectivity between the Tcp/ip nodes.


-44.104.6.2 "gw.ka1rci.ampr.org"

 (Internet gateway)
  

 Hardware: Intel 100Mhz 486DX/4, 16 Megs of RAM, 1.2 Gig IDE hard drive.

 There are two communications ports associated with this computer.


 1. LAN network port running 10baseT connection to the ka1rci TCPIP lan.

 2. CABLE network port running 10baseT connection to the internet.


-44.104.6.3 "bpq.ka1rci.ampr.org"

 (G8BPQ / TCPIP gateway)


Hardware: Intel 80Mhz 486DX/4, 16 Megs of RAM, 1.2 Gig IDE hard drive.

There are three communications ports associated with this computer


 1. SPI modem port with a Hayes Optima v.24 28.8 modem using the G8BPQ

    serial port interface developed by Larry AA1FS.

 2. BPQ network port running 10baseT connection to the ka1rci G8BPQ lan. 

 3. LAN network port running 10baseT connection to the ka1rci TCPIP lan.



-44.104.6.4 "www.ka1rci.ampr.org"

 (Internet web server)


Hardware: Intel 90Mhz Pentium, 256 Megs of RAM, 16 Gig of SCSI Storage.

There are two communications ports associated with this computer


1. LAN network port running 10baseT connection to the ka1rci TCPIP lan.

2. NOVELL network port running 10baseT connection to the ka1rci NOVELL lan.


-44.104.6.5 "qso.ka1rci.ampr.org"

 (World wide convers server)


 Hardware: Intel 80Mhz 486DX/4. 16 Megs of RAM, 500 Meg IDE hard drive.

 There is one communication port associated with this computer.


 1. LAN network port running 10baseT connection to the ka1rci TCPIP lan.



-44.104.6.6 "ka1rci.ampr.org"

 (Local SYSOP Tcp/ip workstation)


 Hardware: Intel 66Mhz 486DX/2, 8 Megs RAM, 250 Meg IDE hard drive.

 There are two communications ports associated with this computer.


1. AX1 radio port with a Kenwood TM-621A 2/220 dual band using a Austin

   tri-band suburan omni antenna. There is one 1k2 Bps TNC connected to

   this radio providing connections on either 2 or 220 as needed.


2. LAN network port running 10baseT connection to the ka1rci TCPIP lan.



-44.104.6.129 "switch.proidence.ampr.org"

 (Remote radio ports)


Hardware: Intel 90Mhz Pentium, 16 Megs RAM, 250 Meg IDE hard drive.

There are three communications ports associated with this computer.


1. port1 radio port with a Kenwood TM-231A on 145.010 Mhz using a six

   element yagi beam. There is one 1k2 Bps TNC connected to this radio

   providing Tcp/ip access for local user.


2. port2 radio port with a Kenwood TM-321A on 223.700 Mhz using a six

   element yagi beam. There is one 2k4 Bps TNC connected to this radio

   providing Tcp/ip link to the No. Dartmouth, MA and Andover, MA switches.
 

3. port3 radio port with a Kenwood TM-431A on 430.380 Mhz using a six

   element yagi beam. There is one 2k4 Bps TNC connected to this radio

   providing Tcpip link to the Lincoln, RI switch.